• Details
  • Videos
  • Parameters

GLT160 Heavy Double-track Lifting Sliding Door

Product Description

GLT160 lifting sliding door is an aluminum alloy double-track heavy lifting sliding door, which independently has been developed and produced by LEAWOD company. If you do not need the function of lifting, you can cancel the lifting hardware accessories and replace them with ordinary pushing and sliding door, the hardware accessories are specially customized lifting hardware of our company. What is the lifting sliding door? In simple terms, it is better than common sliding door sealing effect, can also do more bigger door wide, it is the lever principle, lifting the handle is closed after the pulley lifting, then the sliding door can not move, not only enhance the safety, but also extend the service life of the pulley, if you need to start it again, you need to turn the handle, the door can be gently sliding.

In order to avoid bumping into the exposed handles when pushing between the doors, damaging the paint on the handles and affecting your use, we have configured the anti-collision block for you. You can install it on site according to your needs.

If you are also concerned about the safety risks of sliding doors when they are closed, you can ask us to increase the buffer damping device for you, so that when the door is closing, it will close slowly. We believe that this will be a very good experience for you.

We adopt the integral welding technology for the door sash, and the inside of the profile is filled with 360° no dead angle high density refrigerator grade insulation and energy saving mute cotton.

The bottom track of sliding door is: down leak concealed type non-return drainage track, can rapid drainage, and because it is hidden, more beautiful.

  • Minimalist appearance design

    Semi-hidden window sash design,hidden drainage holes
    One-way non-return differential pressure drainage device, refrigerator grade heat preservation material filling
    Double thermal break structure, no pressing line design

  • One-way non-return drainage system

    Anti-wind | Anti-rain | Anti-insect | Anti-howling

    Preventing indoor and outdoor air exchange and convection

  • Semi-hidden window sash design,greatly improve the sealing

    Double-layer self-pressing sealant strip, six turning point corner, better prevent indoor and outdoor air circulation

  • Exclusive customized heavy-duty push and pull handle

    Leading structure design, CRLEER exclusive customization
    304 stainless steel material, exquisite surface treatment

  • 7D11
  • 5
    Photoshop Temp266801924

GLT160 Heavy Double-track Lifting Sliding Door | Product Parameters

  • Item Number
  • Product Standard
  • Opening Mode
    Lifting Sliding
  • Profile Type
    Thermal Break Aluminium
  • Surface Treatment
    Whole Welding
    Whole Painting (Customized Colors)
  • Glass
    Standard Configuration: 5+20Ar+5, Two Tempered Glasses One Cavity
    Optional Configuration: Low-E Glass, Frosted Glass, Coating Film Glass, PVB Glass
  • Glass Rabbet
  • Hardware Accessories
    Lifting Sash Standard Configuration: Hardware (HAUTAU Germany)
    Non-ascending Sash Standard Configuration: LEAWOD Customized Hardware
    Optinal Configuration: Damping Configuration Can Be Added
  • Window Screen
    Standard Configuration: None
    Optional Configuration: None
  • Outside Dimension
    Window Sash:106.5mm
    Window Frame:45mm
  • Product Warranty
    5 Years
  • Manufacturing Experience
    More Than 20 Years
  • 1-42
  • 1-52
  • 1-62
  • 1-72
  • 1-82